News Archives - Page 17 of 23

By Anže Abram News

30 Sep: Scientific Slam, 16.09.2019, ZRC Atrium

On September 16, 2019, the fourth Scientific Slam took place at the ZRC Atrium. This year’s slam was held as part of the Cutting Edge 2019 conference. In my 5 minute presentation, I presented the fusion and fusion relevant materials, that we are developing at JSI. Znanstveni slam 2019 – Cutting Edge

By Anže Abram News

13 Sep: NEW PUBLICATION; TiN-nanoparticulate reinforced zirconia based nanocomposites suitable for Electrical Discharge Machining.

How to make zirconia based composites electroconductive and thus suitable for Electrical Discharge Machining? You can read about it now in an open access scientific journal Materials. Our coworkers Ana Lazar, Tomaž Kosmač, Janez Zavašnik, Anže Abram and Andraž Kocjan reported on advanced fabrication route of zirconia based nanocomposites resulted in enhanced mechanical and electrical properties enabling cost efficient machining at low contents of reinforcing phase. https://www.mdpi.com/1996-1944/12/17/2789/htm

News

15 Oct: K7 Seminar; dr. Marko Soderžnik, Jožef Stefan Institute, Ljubljana, Slovenia; “Infiltration of Nd-Cu eutectic alloy as a method to improve the coercivity in Nd-Fe-B ribbons.”, Monday, October 21, 2019, at 13.00 in Kolar’s lecture hall

08 Oct: K7 Seminar; prof. dr. Bojana Obradović, University of Beograd, Serbia; “Physiologically relevant characterization of biomaterials in biomimetic bioreactors.”, Monday, October 14, 2019, at 13.00 in Kolar’s lecture hall.

30 Sep: Scientific Slam, 16.09.2019, ZRC Atrium

25 Sep: K7 Seminar; Živa Marinko, JSI, Ljubljana, Slovenia; “The influence of metal titanium surface treatment on the properties of TiO2 nanotubes grown by anodic oxidation.”, Wednesday, September 25, 2019, at 13.00 in Kolar’s lecture hall.

24 Sep: K7 Seminar; Peter Žiger, GETec, Graz, Avstrija; “Correlative SEM/AFM/EDX microscopy – the impact of merging complementary microscopy techniques on nano-scale research and engineering.”, Monday, September 30, 2019, at 13.00 in Kolar’s lecture hall.

20 Sep: K7 Seminar; Matic Korent, JSI, Ljubljana, Slovenia; “Effect of deformation ratio on texture development in hot-deformed Nd-Fe-B magnets. ”, Wednesday, September 25, 2019, at 11.00 in Kolar’s lecture hall.

13 Sep: NEW PUBLICATION; TiN-nanoparticulate reinforced zirconia based nanocomposites suitable for Electrical Discharge Machining.

10 Sep: K7 Seminar; Anja Korent, JSI, Ljubljana, Slovenia; “Polyaniline as material for molecular imprinting sensing applications. ”, Monday, September 16, 2019, at 13.00 in Kolar’s lecture hall

28 Aug: Open Post Doc Position: Recycling and reprocessing of rare-earth-transition metal-based permanent magnets

21 Aug: NEW PUBLICATION; Structured titanium oxynitride (TiOxNy) nanotube arrays for a continuous electrocatalytic phenol-degradation process: Synthesis, characterization, mechanisms and the chemical reaction micro-kinetics