Equipment for Microscopy (collaboration with CEMM)
Ceramics
Laminar Flow Biosafety Cabinet, Bio II Advance, Telstar
Laminar Flow Biosafety Cabinet, Bio II Advance, Telstar
- Dimension (LxBxH) internal (mm): 954x605x587
- Laminar flow speed 0.35 m/s, laminar flow rate 669 m³/h
- Filters HEPA H14 filters according to EN 1822: efficiency of 99.995% MPPS and 99.999 % DOP
- UV light and fans with timer
Automatic titrator 835, Titrando – Metrohm
Automatic titrator 835, Titrando – Metrohm
- Programmable using software Tiamo
- 20 and 50 ml dosing unit 800 Dosino
- 802 Rod Stirrer with 804 Ti stand
- pH meter
High Temperature Furnace, Astro Division, Thermal Technologies Inc.
High Temperature Furnace, Astro Division, Thermal Technologies Inc.
- Maximum temperature: 2400 °C
- Atmosphere: air, Ar, vacuum
Filament Extruder, Filabot EX6
Filament Extruder, Filabot EX6
- Filament Sizes: 1.75mm and 2.85mm
- Material Capacity: Hopper: 3195.5 cm3, Screw Void:8 cm3, Feed Port: 3195.5 cm3
- Extrudable Plastics: PLA, ABS, PC, PP, PS, ULTEM, PEEK, NYLON, HDPE, PETG, and WAX
- Temperature Control: 4 Independently PID controlled heat zones, all with active fan cooling for consistent heating
Spooler, Filabot
Spooler, Filabot
- Puller Wheel Torque: 5 Nm
- Filament Diameter Range:5mm to 3.5mm
- Variable speed control with speed control knob
- 43.18 cm L x 24.13 cm H x 18.42cm W
Laboratory autoclave sterilizer LTA 275, ZIBRUS technology GmbH
Laboratory autoclave sterilizer LTA 275, ZIBRUS technology GmbH
- Chamber volume: 24 L
- Internal dimensions: φ294 x 350mm
- Heating power: 2.2 kW
- Admissible working pressure: 3.5 bar
- Admissible working temperature: 138 deg
Cold isostatic press (CIP) RP 2000 QC/LC, Recherches & Réalisations REMY SAS
Cold isostatic press (CIP) RP 2000 QC/LC, Recherches & Réalisations REMY SAS
- Range: 70–800 MPa
- Stroke: 200 mm
- Section: 49087 mm2
- Max Load: 1963 kN
Non-contact horizontal optical dilatometer, Misura - Expert System Solutions
Non-contact horizontal optical dilatometer, Misura - Expert System Solutions
- Capable to determine expansion and shrinkage curve, coefficient of thermal expansion, glass transition temperature and dilatometric softening point
- Up to 1750 °C
- Heating rates up to 30 °C/min
SPS - Pressure-assisted pulsed current sintering (Spark Plasma Sintering system), Fuji Electronic Industrial – MODEL 615
SPS - Pressure-assisted pulsed current sintering (Spark Plasma Sintering system), Fuji Electronic Industrial – MODEL 615
- SINTER SPS SYNTEX 3000
- Pressure: 100 kN
- Pressure: 5 kN
- Sintering Temperature: 2500 °C
- Sintering DC Pulse Generator Max. Output: 3,000 A
3 roll mill, EXAKT 80E, EXAKT Advanced Technologies GmbH, Norderstedt, Germany
3 roll mill, EXAKT 80E, EXAKT Advanced Technologies GmbH, Norderstedt, Germany
- Mixing, homogenizing and dispersing viscous materials by shear force between the rolls
Torque Rheometer, Brabender Metastation 4E
Torque Rheometer, Brabender Metastation 4E
- Preparation of feedstocks with high torque and temperature
- Dimensions (W x H x D):700 x 870 x 950 mm
- Torque deviation:± 0,15 %
- Speed: 0.2 to 185 min-1
Custom made freeze caster
Custom made freeze caster
Freeze dryer, Christ Alpha 2-4 LSC
Freeze dryer, Christ Alpha 2-4 LSC
- Freezedrying of frozen samples
- Solvent: water, cyclohexane, diluted alcohols
- Chamber volume: 6.5 L
- Condensator temperature: -85 °C
- Sample temperature: approximately -35 °C
- Vacuum: 1×10-3 mbar
Planetary ball mill, PM 400, Retsch
Planetary ball mill, PM 400, Retsch
- Used for grinding
- Speed: 400 rpm
- time: 99 h
- Different jar sizes available
- W x H x D: 836 x 1220 (1900) x 780 mm
Dynamic Light Scattering Instrument, Litesizer DLS, Anton Paar GmbH
Dynamic Light Scattering Instrument, Litesizer DLS, Anton Paar GmbH
- For characterization of nanoparticles and microparticles
3D printers, Prusa i3 MK3S+, Prusa Research a.s.
3D printers, Prusa i3 MK3S+, Prusa Research a.s.
- Additive manufacturing of filaments
- Build Volume: 25 ×21×21 cm
- Layer height: 0.05 – 0.35 mm
- hot end/heat bed temperature: 300 °C / 120 °C
HAGE Industrial Material Extrusion Printer Model 140L – modified for metal and ceramic additive manufacturing
HAGE Industrial Material Extrusion Printer Model 140L – modified for metal and ceramic additive manufacturing
- Large XL – Built chamber (up to 700mm x 500mm x 400mm)
- High friction feeding dual-print head with 2 nozzles
- Extruder temperature up to 450°C
- Suitable for most of commercially available filaments, used also for ceramic and magnetic filaments
- Layer thickness from 0.05 mm
Additional thermoplastic 3D printing system, VERMES Microdispensing GmbH
Additional thermoplastic 3D printing system, VERMES Microdispensing GmbH
- Used for printing ceramic suspensions
- Control unit (MDC 3290+)
- High precision valve based on a piezoelectric element (MDV 3280)
- Multifunctional controller (MFC universal)
3D printer, CeraFab S65, LITHOZ
3D printer, CeraFab S65, LITHOZ
- Lithography-based Ceramic Manufacturing
- Lateral resolution: 40µm
- Layer thickness: 10 – 100µm
- Dimensions (L x W x H): 1.05 x 0.85 x 1.78m
Laser scattering particle size distribution analyser, HORIBA LA-920
Laser scattering particle size distribution analyser, HORIBA LA-920
Surface area and pore size analyser (BET), Quantachrome Nova 2000e
Surface area and pore size analyser (BET), Quantachrome Nova 2000e
- Analysis stations: 2
- Measurement types: B.E.T., STSA, adsorption isotherm, desorption isotherm
- Surface area range:01 m2/g
- Pore size range: 0.35 to >400 nm
- Minimum pore volume: 2.2 x 10-6 ml/g
Zeta potential analyzer, Brookhaven Instruments Corporation Zeta PALS
Zeta potential analyzer, Brookhaven Instruments Corporation Zeta PALS
- Measuring both particle size and zeta potential in solution
- Effective range for particle sizing is 2nm – 3um
- Measurements can be made in a variety of media
Rheometer, Physica MCR 301, Anton Paar GmbH
Rheometer, Physica MCR 301, Anton Paar GmbH
- Measurement of rheological properties
- Plate on plate and cone on plate geometries available
- RheoCompass software
- Max. temperature: 200 °C
Mercury porosimeter, Thermo Scientific PASCAL 140 (low pressure) and 440 (high pressure)
Mercury porosimeter, Thermo Scientific PASCAL 140 (low pressure) and 440 (high pressure)
- Measuring range: 0.01 to 0.1 Kpa (140); 0.1 to 400 Kpa (440)
- Accuracy: Better than 0.2%
- Pore size (diameter): 116 – 3.8 µ (140); 15 – 0.0036 µ (440)
- Particle size (diameter): 330 – 15 µ (140); 40 – 0.01 µ (440)
- Volume detection system: Capacitive
- sample size for solid materials (d x h): 12×40 mm
- detection volume: 0.5 cc
- Volume resolution: 0.0001 cc
RFDA MF basic
RFDA MF basic
- Measures:
- Resonant frequency
- Damping or Internal Friction
- Young’s modulus
- Shear modulus
- Poisson ratio
- Working temperature: room temperature
- Atmosphere: air
Back
