Magnetic materials
Lakeshore Vibrating Sample Magnetometer (VSM)
Lakeshore Vibrating Sample Magnetometer (VSM)
- Measurement of magnetic hysteresis loops for soft and hard magnetic materials
- Temperature range: RT–1000 K
- Magnetic field up to 2.3 T
- In-situ measurements in different atmospheres
- Manual sample positioning and control software
Inert Atmosphere Laboratory with Jet Mill and Spark Plasma Sintering Furnace
Inert Atmosphere Laboratory with Jet Mill and Spark Plasma Sintering Furnace
- Complete setup for powder preparation and consolidation under Ar atmosphere
- Integrated Jet Mill for controlled particle-size reduction
- SPS Furnace for rapid sintering with precise temperature and pressure control
- Enables contamination-free processing of reactive or rare-earth-based materials
Vacuum Furnace System
Vacuum Furnace System
- For operation in high vacuum, Ar, or H₂ atmosphere
- Maximum temperature: 1200 °C
Programmable heating and cooling cycles
- Ideal for alloy annealing and degassing processes
Tube Furnace
Tube Furnace
- Horizontal furnace for controlled heat treatments
- Maximum temperature: 1200 °C
- Equipped with programmable temperature controller
- Suitable for sintering, calcination, and reduction reactions
Electrical Sieving Apparatus
Electrical Sieving Apparatus
- Automated particle-size separation
- Range: 23 µm to 500 µm
- Adjustable vibration amplitude and timer control
- Stainless steel sieve set for metallic and ceramic powders
Electrochemical Furnace
Electrochemical Furnace
- High-temperature furnace for electrochemical experiments
- Temperature up to 1200 °C
- Compatible with inert or reducing atmospheres
- Configured for solid-state ionic and catalytic studies
Microsense Vibrating Sample Magnetometer (VSM)
Microsense Vibrating Sample Magnetometer (VSM)
- High-sensitivity magnetic characterization for small samples
- Field range up to 1.8 T
- Angle adjustment option for in-situ studies
- User-friendly software interface for quick data analysis
Steingroever Magnetograph
Steingroever Magnetograph
- Measurement of hysteresis loops for hard magnetic materials
- Magnetic field up to 2 T
- Determination of coercivity, remanence, and maximum energy product
- Suitable for bulk magnets and sintered compacts
Magnetic Pulser
Magnetic Pulser
- Generation of pulsed magnetic fields up to 6 T
- Configurable pulse strenght
- Used for magnetization of permanent magnets and alignment of powder compacts
Analytical Balance – Mettler Toledo XPE 206
Analytical Balance – Mettler Toledo XPE 206
- Readability: 0.000001 g (6 decimal places)
- Maximum capacity: 220 g
- Built-in draft shield and static elimination system
- Calibrated for high-precision magnetic powder weighing
Turbula Mixer
Turbula Mixer
- Multi-directional sample mixing for homogeneous powder blends
- Adjustable mixing speed and duration
- Compatible with various container sizes
- Ensures uniform powder distribution before pressing or sintering
Tube Furnace (second unit)
Tube Furnace (second unit)
- Horizontal furnace for heat treatment of samples
- Maximum temperature: 1200 °C
- Controlled atmosphere capability
- Ideal for oxidation, reduction, and sintering steps
Edmund Bühler Melt Spinner
Edmund Bühler Melt Spinner
- Rapid solidification system with copper spinning wheel
- Wheel speed up to 40 Hz
- Maximum melt temperature: 1800 °C
- Produces amorphous or nanocrystalline ribbons
Edmund Bühler Vacuum Arc Melter
Edmund Bühler Vacuum Arc Melter
- Melting of up to 6 samples simultaneously (1 cm³ each)
- Controlled atmosphere operation (vacuum or Ar)
- Water-cooled copper hearth
- Ideal for preparation of intermetallic alloys and master alloys
Magnetic Hot Press
Magnetic Hot Press
- Combined magnetic field and pressure-assisted consolidation in polymers
- Magnetic field up to 300 mT
- Maximum temperature: 300 °C
- Pressure up to 5 T
- Used for magnet alignment and densification during pressing
Equipment for Microscopy (collaboration with CEMM)
Ceramics
Laminar Flow Biosafety Cabinet, Bio II Advance, Telstar
Laminar Flow Biosafety Cabinet, Bio II Advance, Telstar
- Dimension (LxBxH) internal (mm): 954x605x587
- Laminar flow speed 0.35 m/s, laminar flow rate 669 m³/h
- Filters HEPA H14 filters according to EN 1822: efficiency of 99.995% MPPS and 99.999 % DOP
- UV light and fans with timer
Automatic titrator 835, Titrando – Metrohm
Automatic titrator 835, Titrando – Metrohm
- Programmable using software Tiamo
- 20 and 50 ml dosing unit 800 Dosino
- 802 Rod Stirrer with 804 Ti stand
- pH meter
High Temperature Furnace, Astro Division, Thermal Technologies Inc.
High Temperature Furnace, Astro Division, Thermal Technologies Inc.
- Maximum temperature: 2400 °C
- Atmosphere: air, Ar, vacuum
Filament Extruder, Filabot EX6
Filament Extruder, Filabot EX6
- Filament Sizes: 1.75mm and 2.85mm
- Material Capacity: Hopper: 3195.5 cm3, Screw Void:8 cm3, Feed Port: 3195.5 cm3
- Extrudable Plastics: PLA, ABS, PC, PP, PS, ULTEM, PEEK, NYLON, HDPE, PETG, and WAX
- Temperature Control: 4 Independently PID controlled heat zones, all with active fan cooling for consistent heating
Spooler, Filabot
Spooler, Filabot
- Puller Wheel Torque: 5 Nm
- Filament Diameter Range:5mm to 3.5mm
- Variable speed control with speed control knob
- 43.18 cm L x 24.13 cm H x 18.42cm W
Laboratory autoclave sterilizer LTA 275, ZIBRUS technology GmbH
Laboratory autoclave sterilizer LTA 275, ZIBRUS technology GmbH
- Chamber volume: 24 L
- Internal dimensions: φ294 x 350mm
- Heating power: 2.2 kW
- Admissible working pressure: 3.5 bar
- Admissible working temperature: 138 deg
Cold isostatic press (CIP) RP 2000 QC/LC, Recherches & Réalisations REMY SAS
Cold isostatic press (CIP) RP 2000 QC/LC, Recherches & Réalisations REMY SAS
- Range: 70–800 MPa
- Stroke: 200 mm
- Section: 49087 mm2
- Max Load: 1963 kN
Non-contact horizontal optical dilatometer, Misura - Expert System Solutions
Non-contact horizontal optical dilatometer, Misura - Expert System Solutions
- Capable to determine expansion and shrinkage curve, coefficient of thermal expansion, glass transition temperature and dilatometric softening point
- Up to 1750 °C
- Heating rates up to 30 °C/min
SPS - Pressure-assisted pulsed current sintering (Spark Plasma Sintering system), Fuji Electronic Industrial – MODEL 615
SPS - Pressure-assisted pulsed current sintering (Spark Plasma Sintering system), Fuji Electronic Industrial – MODEL 615
- SINTER SPS SYNTEX 3000
- Pressure: 100 kN
- Pressure: 5 kN
- Sintering Temperature: 2500 °C
- Sintering DC Pulse Generator Max. Output: 3,000 A
3 roll mill, EXAKT 80E, EXAKT Advanced Technologies GmbH, Norderstedt, Germany
3 roll mill, EXAKT 80E, EXAKT Advanced Technologies GmbH, Norderstedt, Germany
- Mixing, homogenizing and dispersing viscous materials by shear force between the rolls
Torque Rheometer, Brabender Metastation 4E
Torque Rheometer, Brabender Metastation 4E
- Preparation of feedstocks with high torque and temperature
- Dimensions (W x H x D):700 x 870 x 950 mm
- Torque deviation:± 0,15 %
- Speed: 0.2 to 185 min-1
Custom made freeze caster
Custom made freeze caster
Freeze dryer, Christ Alpha 2-4 LSC
Freeze dryer, Christ Alpha 2-4 LSC
- Freezedrying of frozen samples
- Solvent: water, cyclohexane, diluted alcohols
- Chamber volume: 6.5 L
- Condensator temperature: -85 °C
- Sample temperature: approximately -35 °C
- Vacuum: 1×10-3 mbar
Planetary ball mill, PM 400, Retsch
Planetary ball mill, PM 400, Retsch
- Used for grinding
- Speed: 400 rpm
- time: 99 h
- Different jar sizes available
- W x H x D: 836 x 1220 (1900) x 780 mm
Dynamic Light Scattering Instrument, Litesizer DLS, Anton Paar GmbH
Dynamic Light Scattering Instrument, Litesizer DLS, Anton Paar GmbH
- For characterization of nanoparticles and microparticles
3D printers, Prusa i3 MK3S+, Prusa Research a.s.
3D printers, Prusa i3 MK3S+, Prusa Research a.s.
- Additive manufacturing of filaments
- Build Volume: 25 ×21×21 cm
- Layer height: 0.05 – 0.35 mm
- hot end/heat bed temperature: 300 °C / 120 °C
HAGE Industrial Material Extrusion Printer Model 140L – modified for metal and ceramic additive manufacturing
HAGE Industrial Material Extrusion Printer Model 140L – modified for metal and ceramic additive manufacturing
- Large XL – Built chamber (up to 700mm x 500mm x 400mm)
- High friction feeding dual-print head with 2 nozzles
- Extruder temperature up to 450°C
- Suitable for most of commercially available filaments, used also for ceramic and magnetic filaments
- Layer thickness from 0.05 mm
Additional thermoplastic 3D printing system, VERMES Microdispensing GmbH
Additional thermoplastic 3D printing system, VERMES Microdispensing GmbH
- Used for printing ceramic suspensions
- Control unit (MDC 3290+)
- High precision valve based on a piezoelectric element (MDV 3280)
- Multifunctional controller (MFC universal)
3D printer, CeraFab S65, LITHOZ
3D printer, CeraFab S65, LITHOZ
- Lithography-based Ceramic Manufacturing
- Lateral resolution: 40µm
- Layer thickness: 10 – 100µm
- Dimensions (L x W x H): 1.05 x 0.85 x 1.78m
Laser scattering particle size distribution analyser, HORIBA LA-920
Laser scattering particle size distribution analyser, HORIBA LA-920
Surface area and pore size analyser (BET), Quantachrome Nova 2000e
Surface area and pore size analyser (BET), Quantachrome Nova 2000e
- Analysis stations: 2
- Measurement types: B.E.T., STSA, adsorption isotherm, desorption isotherm
- Surface area range:01 m2/g
- Pore size range: 0.35 to >400 nm
- Minimum pore volume: 2.2 x 10-6 ml/g
Zeta potential analyzer, Brookhaven Instruments Corporation Zeta PALS
Zeta potential analyzer, Brookhaven Instruments Corporation Zeta PALS
- Measuring both particle size and zeta potential in solution
- Effective range for particle sizing is 2nm – 3um
- Measurements can be made in a variety of media
Rheometer, Physica MCR 301, Anton Paar GmbH
Rheometer, Physica MCR 301, Anton Paar GmbH
- Measurement of rheological properties
- Plate on plate and cone on plate geometries available
- RheoCompass software
- Max. temperature: 200 °C
Mercury porosimeter, Thermo Scientific PASCAL 140 (low pressure) and 440 (high pressure)
Mercury porosimeter, Thermo Scientific PASCAL 140 (low pressure) and 440 (high pressure)
- Measuring range: 0.01 to 0.1 Kpa (140); 0.1 to 400 Kpa (440)
- Accuracy: Better than 0.2%
- Pore size (diameter): 116 – 3.8 µ (140); 15 – 0.0036 µ (440)
- Particle size (diameter): 330 – 15 µ (140); 40 – 0.01 µ (440)
- Volume detection system: Capacitive
- sample size for solid materials (d x h): 12×40 mm
- detection volume: 0.5 cc
- Volume resolution: 0.0001 cc
RFDA MF basic
RFDA MF basic
- Measures:
- Resonant frequency
- Damping or Internal Friction
- Young’s modulus
- Shear modulus
- Poisson ratio
- Working temperature: room temperature
- Atmosphere: air
Back
